Sarking
Insulation
Suitable
for installation on timber rafters where the tile
or slate coverings are to be replaced or indeed
for new build to give maximum space saving in the
attic together with ease of
application. |
 |
Flat
Roofing
Use either a bitumen faced
board or a plywood composite panel board (fixed to
joists) to create either a universal or a built up
felt waterproofing roof system. |
 |
Between Rafter
Insulation In Pitched Timber Roofs
Friction
fit between roof rafters ensuring adequate
ventilation and then seal horizontal joints with
aluminum tape. |
 |
Under
Rafter Insulation In Pitched Timber
Roofs
Use clout
nails to fasten to the rafters to eliminate
thermal bridging; ideal in conjunction with
plasterboard for loft conversions etc. |
 |
Upgrading The Thermal Values Of Internal
Walls (Sheathing)
Install in-between vertical and horizontal
batons and seal joints with aluminum tape. Cover
with plasterboard to finish. |
 |
Between And Over Purlins In
Industrial Buildings Both In Roof And Walls
Space either between or over
purlins in walls and/or roof to create a well
insulated outbuilding.
|
 |
Cavity Wall Insulation
Using wall ties to
fix, start one course below the DPC and continue
throughout the cavity. |
 |
Floors
Use polyurethane for both over and under
slab flooring. |
 |
| Between
floor joists in suspended timber floors, cut and
friction fit (or use retaining
clips). |
